Size Guide

Necklace Lengths

Each necklace sold on the Duverah website, will include an in-depth detailed description, including the length of the necklace in centimetres and a photo of each piece on a model. If you are unsure what your desired piece would look on you, you could:

  • Use a measuring tape to measure around neck to visualise where the piece would sit.
  • Use a piece of string to measure against a ruler, this will enable you to see if the piece will be suitable for you.

 

Ring Sizing 

All of our rings come in a large range of ring sizes.

Please use our sizing chart as a reference when choosing a size.

Different ring sizers can vary slightly, and we unfortunately cannot be held liable for sizing conversion inconsistencies.

 

 

 

METHOD 1: How to measure your ring size - Using an existing ring

  1. Find a ring that fits comfortably on the finger you intend to wear your new ring on.

  2. Measure the internal diameter of the ring, using a ruler or measuring tape. Ensure you are using a ruler with millimetre (mm) measurements.

  3. Make sure to place the ruler in the MIDDLE of the ring so you a measuring the largest section of your ring. Remember you are measuring the internal diameter so do not include the band when measuring. 

  4. Please refer to the picture below to see where the ruler must be placed in order to get the more accurate measurement. 

  5. Lastly use our ring size chart above to convert your diameter measurement into the correct ring size.

 

 

 

METHOD 2: Measure your finger

  1. Cut a piece of string or paper to a length of around 10 centimetres (cm).

  2. Wrap the paper or string around your finger at the point where the ring should sit. Pull so that the string fits comfortably around your finger - not too tight and not too loose.

  3. Use a pen to mark the point where the end of the string or paper overlaps itself.

  4. Lay the string or paper out against a ruler or tape measure, and measure the length (mm) from its end to the point you have marked with pen.

  5. This measurement will give you your finger circumference. Use it to find your size using our ring size chart above.

 

 

If you are still unsure of your size, we highly recommend visiting your nearest jeweller to have your ring size measured, this service is free of charge and is very accurate. Otherwise if you have any more queries regarding ring sizes, please email info@duverah.com.